
Features
ユPassive device, no power required.
ユIncluding 2 units as transmitter and receiver
ユSupports up to 1280 × 1024 pixels.
ユUp to 400ft via standard 4 pairs CAT5 STP or
UTP cable instead of VGA cable.
ユTransmitter build in virtual DDC to avoid improperly
setting at resolution and frequency.
ユTransmitter built in sync mode selection for signal
stability.
ユReceiver built in sync filter level adjustment for
signal stability.
ユPerfect for classrooms, lecture halls, tradeshows,
video information displays. etc
Max. Distance via CAT5 Cable
- 640 × 480 Pixel (15Mhz) up to 135M (400ft)
- 800 × 600 Pixel (30Mhz) up to 105M (300ft)
- 1024 × 768 Pixel (60Mhz) up to 75M (225ft)
- 1280 × 1024 Pixel (100Mhz) up to 60M (180ft)
Specifications::
ユDevices: DVR, PCs, Laptop | VGA Monitors, Projectors
ユInput Signal Video : 1Vp-p
ユHorizontal & Vertical SYNC : TTL standard, 300kHz max, bandwidth
ユInsertion Loss: Less then 3dB per pair ove the frequency range
ユVideo Signal Return Loss: -15dB max from DC to 60Mhz
ユRJ45 Pin Configuration: R video (Red) : Pin 1 (+),
Pin 2 (-) Balanced
ユEIA 568B Wiring Standard :
- G Video (Greed) : Pin 4 (+), Pin 5 (-) Balanced
- B Video (Blue) : Pin 7 (+), Pin 8 (-) Balanced
- Horizonal Sync : Pin 3, Vertical sync : Pin 6
ユImpedance
- Input : RGB 75 O (DB15 HD)
- Unbalanced Input : RGB 100 O (RJ45 shielded)
- Unbalanced
- Output : RGB 100 O (RJ45 shielded)
- Unbalanced Input : RGB 75 O (DB15 HD)
- Unbalanced
- Horizontal and Vertical Sync : TTL Standard
ユSetting Switch 2 Stage Slide Switch 5 Stage Dip Switch
ユTransmission Distance 60 - 135 meters depend on image resolution
ユLink Cable CAT5 / CAT5e / CAT6 / STP or UTP Cable
ユTemperature Operation : 0~55°C, Storage : -20 ~ 85°C, Humidity : up to
95%
ユDimensions 110(W)mm × 77(H)mm × 26(D)mm