Home :: CCTV TESTER :: CCTV Touch Screen Tester Monitor 3.5" LCD for HD-TVI Security Cameras & Equipment

CCTV Touch Screen Tester Monitor 3.5" LCD for HD-TVI Security Cameras & Equipment

CCTV Touch Screen Tester Monitor 3.5" LCD for HD-TVI Security Cameras & Equipment
TVI Test Monitor TVI Tester Monitor to Test TVI cameras LD-M4400T
2.00 lbs
Our price:
$ 349.95

Perfect solution to test your TVI Cameras & IP Cameras with this LCD tester before doing any installation.

3.5 inch 480x320 touch screen, easy to operate
ONVIF IP camera video testing
Compatible with H.264 / MPEG4 / MJPEG IP cameras, such as Dahua, HIKVISION, and ACTI. Customized service is available
Built in Wi-Fi: receives video from wireless cameras or ONVIF cameras connected to the network
Analog camera video display. Auto adapts and displays the video in NTSC / PAL formats
Support more than 30 protocols, such as PELCO-P, PELCO-D, SAMSUNG, etc
Video image digital zoom to view the image in greater detail
Snapshot function allows you to save the current image as a JPG file in the SD card
Video recording and playback
LED Flashlight / 4GB Micro SD card included
LCD screen brightness / contrast / color saturation adjustable
Enhanced Color bar generator: PAL / NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive eight-system colorful images)
PING Test: PING is the most conventional network debugging tool; it is used for testing if the connected IP camera or other network equipment's Ethernet port is working normally and the IP address is correct
In digital IP surveillance applications, if the IP camera's IP address is not known; the device cannot be used. An IP address scan can quickly search for the connected IP camera or other network device's IP address
The PoE voltage test can test for PoE voltage when a POE switch is supplying POE power to an IP camera
Cable test: Tests LAN cable sequence of wires
Support RS232 / RS485, Rate 600 ~ 115200bps adjustable
PTZ protocol analysis, control protocol command displays to check RS485 transmission whether is normal, easy to find the fault device
PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and sets and the preset position
DC 12V 1A output power for cameras / Audio input test
3.7V 3000mAh, Lithium Ion Polymer Battery can last 10 hours for normal use after charging for 4-5 hours. Remaining battery charge indicator.

Display 3.5 inch Capacitive touch screen, resolution 480 (RGB) x 320
Network Port 10/100M auto adapt, RJ45
WIFI Built in WIFI, speeds 150M, allows you to connect to a wireless network and view IP camera
IP Camera Type ONVIF, ONVIF PTZ, Dahua IPC-HFW2100P, Hikvision DS-2CD864-E13, Samsung SNZ-5200, Tiandy TD-NC9200S2, Kodak IPC120L, Honeywell HICC-2300T, RTSP Viewer. Customized welcom
Video Input/Output 1 channel BNC input & 1 channel BNC looped output, NTSC/PAL (Auto adapt)
Video Level Test Video signals measured in IRE or mV
Zoom Image Supports Analog and IP camera image zooming & movement
Snapshot, Video Record & Playback Capture still images and record live video. Media player will view photos and playback video
12V/1A Power Output Output DC 12V / 1A power for camera
Audio Test 1 channel audio signal input, test whether sound normal, supports record and save audio
PTZ Control Support RS232/RS485 control, Baud 600-115200bps, Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc
Video Signal Generator Output one channel PAL/NTSC color bar video signal for testing monitor or video cable (red, green, blue, white, black)
Color Bar Generator Local side PC can login the tester, send the signal by network, test network connection communication whether normal
UTP Cable Tester Test UTP cable connection status and display on the screen. Read the number on the screen
Data Monitor Captures and analyzes the command data from controlling device, also can send hexadecimal
Network Test IP address scan, link scan, and Ping test. Quickly search for the IP camera's IP address on your network
PoE Test Measures PoE switch voltage and displays pin configuration
External Power Supply DC 5V (1.5A)
Battery Built-in 3.7V Lithium polymer battery, 3000m/Ah
Rechargeable After charging 3-4 hours, normal working time 8 hours
Operation setting Capacitive touch screen, OSD menu, select your desired language: English, Chinese, Korean, Russian, Italian or Polish, etc
Auto off 1-30 (mins)
Working Temperature -10°C ~ +50°C
Working Humidity 30% - 90%
Dimension 194mm x 112mm x 48mm

: *
: *
: *
1000 Feet Video RG59 Coax Cables
$ 89.95
5.8ghz Wireless Kit for Transmitting Video & Audio
$ 199.95
Metal Wall Mount with Slide-in for Large dome camera
$ 49.99
Mount with Built-In Bubble Level for 30 to 60" LCD LED Monitor
$ 59.95
Aluminum Wall or Ceiling CCTV Camera Mount 5" inch (pack of 4)
$ 69.99
8CH 1080p HD-SDI Security DVR System - Auto Detects Analog/960H/HD-SDI
$ 599.99

Product rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.