Home :: CCTV TESTER :: CCTV Multi Tester Monitor 5.6" LCD for Testing Video Cameras & Equipment VGA-PTZ-Cameras

CCTV Multi Tester Monitor 5.6" LCD for Testing Video Cameras & Equipment VGA-PTZ-Cameras

CCTV Multi Tester Monitor 5.6" LCD for Testing Video Cameras & Equipment VGA-PTZ-Cameras
ld lfc56lc cctv tester cctv test monitor with eyemax ldlfc56lc LD-LFC56LC EYEMAX Test monitor
2.00 lbs
Our price:
$ 149.95

Cctv Kits with Monitor

Spy Sonic Portable cctv kits with monitor  are one of the most convenient tools that a video surveillance installer can use when installing CCTV cameras. Our kits are compact, portable and lightweight – perfect for installers who are on the go and require testing capabilities at a remote location. The 2.7” test monitor kit with wrist strap for easy portability and the 5.6” test monitor kit deliver exceptionally sharp, crisp pictures and are ideal in supporting indoor and outdoor CCTV camera installations.

Cctv Spy Cameras

Welcome to the Spysonic website. We offer a comprehensive range of high quality complete cctv spy cameras solutions to suit any scenario whether you need a hidden camera for your home or an all singing, all dancing CCTV system for your business.

infrared cctv camera

We offer a wide selection of infrared cctv camera  that are ideal for night vision recording.

Cctv Camera Recorder

Here we have our best Cctv Camera Recorder  which are designed for covert recording situations and top secret surveillance.

This highly efficient multi-functional portable cctv kits with monitor backlight display panel of 5.6" wide display. This test monitor is the perfect solution to test analog CCTV cameras & Equipments prior or during your installation. You can easily adjust the camera focus and control the P/T/Z for Speed Dome Cameras. Futhermore, tester monitor supports the camera OSD menu control feature (Up the coax) which you can set Camera OSD menu via COAX communication or RS-485 from the remote side. Also it provides Full Color Bar to check the video siganl. With the LED backlight, the TFT-LCD display shows max. 640 × (RGB) × 480 resolution and the battery lasts up to 8 hours. The video level meter displays the brightness (A. level) and the color (F. level) of the video signal numerically; this feature is useful when installers want to check the camera and cabling status and adjust the video level of an UTP receiver. Using this device, one sole installer can check every part of CCTV system alone. Also you can reduce the time and the labor cost when installing and checking the CCTV system. 1 year warranty.

5.6 inch wide TFT-LCD digital panel
Possible to set camera OSD menu and test P/T/Z via Coaxial communication (Pelco-C protocol) or RS-485 from a remote side (max. 800M by coaxial cable communication, 1.2km by RS-485 communication).
Numerical video level meter for checking the video signal (A.Level-brightness / F.Level-color)
LED Back Light (Low Power Consumption)
Supply power to the camera with 12VDC/500mA (power harness included)
Various video input: CVBS, XVGA (640x480, 1024x768/60Hz) signal
High capacity Li-ion Polymer battery lasting up to 8 hours
(16 hours with optional extra battery)
Guideline indicator to adjust the camera angle (applicable to elevator, hallway and etc.)
P/T/Z control (RS-485) for Speed Dome Camera (possible to add new protocols upon customer request)
Video signal distribution (Loop Through) select switch (HI-Z / 75O)
Monitor test or video source signal output (PATTERN OUT)
Possible to zoom in by Up Scale (HOT Key)
Audio Input (optional)
Portable and convenient for using with leather bag and neck string

LCD Display Resolution 640×480
Size 5.6"
Pixel Pitch 0.0588(W) × 0.1764(H)
Brightness (cd) Min: 300 / Normal : 350
Angle of View Top : 50° / Bottom : 70° / Left : 70° / Right : 70°
Response (ms) 15
XVGA 1024×768, 60Hz
Output CVBS PATTERN ON : Full color bar
OFF : Loop through
NTSC / PAL 1.0Vp_p (75O)
Indication range for
CVBS video signal level A LEVEL 10 ~ 118%
F LEVEL 20 ~ 120%
Error Rate ±2%
Connection port Input BNC-F
Output BNC-F
RS-485 OSD Control
Power Input DC 12.6V (Adaptor)
Output ˜ DC 12V
Color Gray
Battery Li-Polymer: 11.1V, 2200mA (protection circuit built-in)
Power Consumption CVBS : 4.5W / When working Level Meter : 5W
Temperature / Humidity 0°C ~ 50°C ( 32°F ~ 122°F) / 0% ~ 80%
Weight 1Kg (2.2 lbs)
Dimension (without the BAG) 192(W)mm × 131(H)mm × 50(D)mm
7.6(W)" × 5.1(H)" × 2.0(D)"

: *
: *
: *
Aluminum Surveillance Camera Mount Bracket 22" - 40" inch for Ceiling
$ 34.99
16CH 30A 12V DC Power Distributors for Infrared Cameras
$ 119.95
1000ft Power Cable 18/2 ( 2 or 4 conductors )
$ 69.95
DC 12V 4 Channel Power Adapter - UL Listed
$ 23.95
Phone Recorder Call Assistant
$ 169.00
Metal Wall Mount with Slide-in for Large dome camera
$ 49.99
Portable RF Bug and Hidden Camera Detector
$ 72.00

Product rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.